When it comes to mounting our LED flexible strip lights (AKA: tape lights) there is no better sealant than GT Products 2100. This is a non-slump one-part silicone that cures to a tough elastomer when exposed to atmospheric moisture at room temperature. GT 2100 may be applied to horizontal, vertical and overhead surfaces without sagging. GT Products 2100 will adhere without a primer to many clean substrates such as (oxime) system and has no offensive odor. Because no corrosive by-products are evolved, GT Products 2100 will not corrode metals and can be used in contact with mortar and cement.
GT Products 2100 features excellent resistance to heat, cold, water, ozone, and ultra-violet rays. It remains flexible and does not crack or harden. GT Products 2100 contains no solvents and has negligible shrinkage during cure. GT Products 2100 is useful over a temperature range of -75°F to 450°F for extended operation and for intermittent periods up to 500°F.
A simple bead on the back of the strip light, stick it, wipe away the excess, and your done! A temporary fastener may be require and each end until cured as the weight of the wire may pull it off.
Sticks our LED Strip Lights to:
- sheet metal
- carbon fiber
- and more!
This is not regular silicone like the ones sold at the big box stores. Those will not bond with our lights. Even 3M 5200 and Life Seal will not bond. Our strips must use this silicone.